What you need:

1. Phillips screwdriver

2. Instrument panel

3. Pick tool

4. Fall light

5. Wire ties

6. Electrical tape

7. Wire cutters

8. Conditioner

9. Drop cloths

Note: Remove the old stereo before you start!

More notes:

You must ensure that the battery because you can not connect to the stream when you install the speakers not lose. It can also prevent injuries intrial.

Take all the hardware that came in the box.

There will be speakers factory. Instructions to imagine the speakers would come in the factory manual that came with your car. If you do not have the manual, I would suggest calling the manufacturing sector.

Wheelbase:

o To begin, you will see the flat head screwdriver required. With this tool you can check your old vines, like the old factory speakers in the hands of those lives.

Or is it necessarypulling the wires from the lighter. It will help with the installation of other speakers.

Connect the G wire to the cigarette lighter.

Or, you must turn on the ignition and then select the wire under the dashboard.

Replace the meter or the light for the ignition. The lights turn on.

Now, or search for the electric cable coming from your stereo. This led the forces of one of the stereo. Will then rotate the head with ablack electrical tape so as not to touch any metal surface.

Related posts:

1. How to install a car stereo
2. Car Stereo Installations
3. Installing Aftermarket Head Units
4. Car Audio – How to Install Car Audio
5. Car Audio Component Speakers – Available in many standard formats
6. Extend iPod battery life
7. The installation of the search engine and better sound effects Marine Audio System
8. How do you buy a Pioneer Car Audio
9. The next generation of mobile phones – LG KF510
10. Autoradio Loud